Sprouts, Seed

Índices de madurez

Índices de madurez

Sprouts, plant seedlings consumed shortly after germination, are produced from many vegetable and agronomic plant seeds. Harvest maturity is highly regulated by germination (sprouting) conditions. The desired sprout length is the primary maturity index and harvesting is done at a relatively fixed number of days following radicle (root) emergence. Depending on seed type, harvest generally occurs 3 to 8 days after germination (Ex. alfalfa and sunflower, respectively). Examples of typical desired sprout lengths are given below:

Type Harvest Maturity (mm)
Adzuki 14 to 26
Alfalfa 26 to 38
Bean 26 to 38
Buckwheat 10 to 15
Brassica spp
(Broccoli, etc)
16 to 26
Garbanzo 26 to 36
Mung Bean 26 to 76
Radish 16 to 26
Wheat 10 to 15
Índices de calidad

Sprouts should be clean, brightly colored for the type and free of damage, debris and decay. Bean sprouts should be etiolated (lacking noticeable green chlorophyll) with white root tips ( none to very limited browning). Sprouts are typically harvested and washed free of seed coats and non-germinated seed. If germinated in a solid medium rather than in hydroponic culture, sprouts are thoroughly washed to remove adhering materials.

Temperatura óptima

0°C (32°F)

Rapid cooling is essential to achieve the full storage potential of seed sprouts. Under these conditions most sprouts may be expected to maintain acceptable quality for 5 to 9 days. Shelf-life at 2.5°C (36°F) is less than 5 days, at 5°C (41°F), and at 10°C (50°F) is less than 2 days. The high respiration rates and perishable nature demand distribution and short-term storage at 0°C (32°F). Although industry experiences with Mung Bean suggest the potential for damage, no symptoms of chilling injury have been unequivocally linked to this temperature regime.

Tasa de respiración

Mung Bean Sprouts:

Temperature 0°C (32°F) 5°C (41°F) 10°C (50°F) 20°C (68°F)
ml CO2/kg·hr 9-11 19-21 42-45 NR

To calculate heat production multiply ml CO2/kg·hr by 440 to get Btu/ton/day or by 122 to get kcal/metric ton/day.
NR - not recommended

Respuestas al etileno

Low to medium sensitivity. Ethylene effects are not considered to be a significant factor in the optimal handling and distribution regimes for sprouts.

Humedad relativa óptima

95-100%

Tasa de producción de etileno

Mung Bean:

Temperature 0°C (32°F) 5°C (41°F) 10°C (50°F)
ml/kg·hr 0.15 0.24 0.9
Respuestas a la atmósfera controlada (AC)

Packing sprouts in plastic "clamshells" with limited venting or in perforated film pouches helps maintain quality. One report on mung bean sprouts (CA) demonstrated that 5% O2 + 15% CO2 extended keeping quality.

Fisiopatías y daños físicos

Freeze injury. Sprouts are susceptible to freeze injury but sensitivity varies widely. Shoots become water-soaked and turn black. Roots appear water-soaked and glassy. Roots become soft quickly on warming and darken rapidly.
 

Enfermedades

Bacterial Decay (Pantoea agglomerans = Erwinia herbicola, Pseudomonas fluorescens Biovar II, Pseudomonas marginalis, Pseudomonas viridiflava) is a common problem in many sprout types and will develop very rapidly in production systems as well as in postharvest storage, at warmer than optimum temperatures. High quality seed, proper pre-germination, seed treatments and postharvest refrigeration are the primary controls but washing sprouts in chlorinated or ozonated water (or other effective and approved disinfectant) will help control this decay and spoilage.

Microbial Food Safety and Sanitation. Several types of seed sprouts have been clinically linked to several notable outbreaks of bacterial pathogens, especially in recent years. Multistate incidents of highly virulent Salmonella and enterohemorrhagic E. coli O157:H7 have been traced to the consumption of alfalfa, Mung bean, and possibly radish sprouts. Seed contamination has been positively identified as, at least, one confirmed source of contamination in several cases.

In 1998, the California Department of Health Services led a petition for Environmental Protection Agency (EPA) Section 18 registration of a 2% Ca(OCl)2 treatment for alfalfa seed as the best available method to ensure elimination of pathogens from seed. Full EPA Section 3 registration is expected in 2000. The International Sprout Growers association has endorsed this treatment as a voluntary industry-wide standard.

Organic sprout growers are at risk of losing their organic certification due to above limit residuals of hypochlorite. Alternative treatments are being actively investigated.